Diamond is a solid form of the element carbon with its atoms arranged in a crystal structure called diamond cubic. Diamond has the highest hardness and thermal conductivity of any natural material, properties that are used in major industrial applications such as cutting and polishing tools. Another solid form of carbon known as graphite is the chemically stable form of carbon at room temperature and pressure, but diamond is metastable and converts to it at a negligible rate under those conditions.

Because the arrangement of atoms in diamond is extremely rigid, few types of impurity can contaminate it (two exceptions are boron and nitrogen). Diamond also has a very high refractive index. A relatively high optical dispersion. Small numbers of defects or impurities (about one per million of lattice atoms) color diamond blue (boron), yellow (nitrogen), brown (defects), green (radiation exposure), purple, pink, orange, or red.

Most natural diamonds have ages between 1 billion and 3.5 billion years. Under high pressure and temperature, carbon-containing fluids dissolved various minerals and replaced them with diamonds. Much more recently (hundreds to tens of million years ago), they were carried to the surface in volcanic eruptions and deposited in igneous rocks known as kimberlites and lamproites.

Buy Natural Diamonds

Synthetic diamonds can be grown from high-purity carbon under high pressures and temperatures or from hydrocarbon gases by chemical vapor deposition (CVD). Natural, synthetic and imitation diamonds are most commonly distinguished using optical techniques or thermal conductivity measurements.

Properties

Diamond is a solid form of pure carbon with its atoms arranged in a crystal. [4][5] Tetrahedra are rigid, the bonds are strong, and of all known substances diamond has the greatest number of atoms per unit volume, which is why it is both the hardest and the least compressible. In diamond they are sp3 and the atoms form tetrahedra with each bound to four nearest neighbors. However, the stronger bonds make graphite less flammable. The two most common allotropes of pure carbon are diamond and graphite. [2] In graphite, the bonds between nearest neighbors are even stronger, but the bonds between parallel adjacent planes are weak, so the planes easily slip past each other. Solid carbon comes in different forms known as allotropes depending on the type of chemical bond. [8] Thus, graphite is much softer than diamond. [6][7] It also has a high density, ranging from 3150 to 3530 kilograms per cubic metre (over three times the density of water) in natural diamonds and 3520 kg/m3 in pure diamond. In graphite the bonds are sp2 orbital hybrids and the atoms form in planes, with each bound to three nearest neighbors 120 degrees apart.

The highest sound velocity.

Diamonds have been adopted for many uses because of the material’s exceptional physical characteristics. [9] It also has high electrical resistance. It is chemically inert, not reacting with most corrosive substances, and has excellent biological compatibility. The highest sound velocity. It has the highest thermal conductivity. It has low adhesion and friction, and its coefficient of thermal expansion is extremely low. Its optical transparency extends from the far infrared to the deep ultraviolet and it has high optical dispersion.

Thermodynamics

The equilibrium pressure and temperature conditions for a transition between graphite and diamond are well established theoretically and experimentally. The equilibrium pressure varies linearly with temperature, between 1.[10][11] However, the phases have a wide region about this line where they can coexist.10 MPa), the stable phase of carbon is graphite, but diamond is metastable and its rate of conversion to graphite is negligible.[13]

Research results published in an article in the scientific journal Nature Physics Both planets are made up of approximately 10 percent carbon. [14][15] Since large quantities of metallic fluid can affect the magnetic field, this could serve as an explanation as to why the geographic and magnetic poles of the two planets are unaligned. Could hypothetically contain oceans of liquid carbon.

Buy Gia Certified Diamonds

Crystal structure

The most common crystal structure of diamond is called diamond cubic. Although there are 18 atoms in the figure, each corner atom is shared by eight unit cells and each atom in the center of a face is shared by two, so there are a total of eight atoms per unit cell. It is formed of unit cells (see the figure) stacked together. [17] [16] The length of each side of the unit cell is denoted by a and is 3.567 angstroms.

Best Place Buy Diamonds Online

The nearest neighbour distance in the diamond lattice is 1.732a/4 where a is the lattice constant, usually given in Angstrøms as a = 3.3567 nm.

Buy Diamonds In Thailand Thailand

A diamond cubic lattice can be thought of as two interpenetrating face-centered cubic lattices with one displaced by 1⁄4 of the diagonal along a cubic cell, or as one lattice with two atoms associated with each lattice point.[17] Viewed from a crystallographic direction, it is formed of layers stacked in a repeating ABCABC … pattern. Diamonds can also form an ABAB … structure, which is known as hexagonal diamond or lonsdaleite, but this is far less common and is formed under different conditions from cubic carbon.[18]

Crystal habit

Diamonds occur most often as euhedral or rounded octahedra and twinned octahedra known as macles. As diamond’s crystal structure has a cubic arrangement of the atoms, they have many facets that belong to a cube, octahedron, rhombicosidodecahedron, tetrakis hexahedron, or disdyakis dodecahedron. The crystals can have rounded-off and unexpressive edges and can be elongated. Diamonds (especially those with rounded crystal faces) are commonly found coated in nyf, an opaque gum-like skin. [19]

Some diamonds contain opaque fibers. Their colors range from yellow to green or gray, sometimes with cloud-like white to gray impurities. The structure is the result of numerous impurities with sizes between 1 and 5 microns. [20] They are referred to as opaque if the fibers grow from a clear substrate or fibrous if they occupy the entire crystal. Their most common shape is cuboidal, but they can also form octahedra, dodecahedra, macles, or combined shapes. These diamonds probably formed in kimberlite magma and sampled the volatiles.

Diamonds can also form polycrystalline aggregates. [20] Carbonado, a type in which the diamond grains were sintered (fused without melting by the application of heat and pressure), is black in color and tougher than single crystal diamond. [20][22][23] [21] It has never been observed in a volcanic rock. There are many theories for its origin, including formation in a star, but no consensus. There have been attempts to classify them into groups with names such as boart, ballas, stewartite, and framesite, but there is no widely accepted set of criteria.

Which Jewelry Stores Buy Diamonds

Mechanical

Hardness

Where To Buy Diamonds In New York

Diamond’s great hardness relative to other materials has been known since antiquity, and is the source of its name. This does not mean that it is infinitely hard, indestructible, or unscratchable.[24] Indeed, diamonds can be scratched by other diamonds[25] and worn down over time even by softer materials, such as vinyl phonograph records.[26]

Diamond hardness depends on its purity, crystalline perfection, and orientation: hardness is higher for flawless, pure crystals oriented to the direction (along the longest diagonal of the cubic diamond lattice).[27] Therefore, whereas it might be possible to scratch some diamonds with other materials, such as boron nitride, the hardest diamonds can only be scratched by other diamonds and nanocrystalline diamond aggregates.

Buy Loose Diamonds Online

The hardness of diamond contributes to its suitability as a gemstone. Diamonds can scratch other diamonds, but this can result in damage to one or both stones. [31] High temperature to produce diamonds that are harder than the diamonds used in hardness gauges. Because it can only be scratched by other diamonds, it maintains its polish extremely well. It is possible to treat regular diamonds under a combination of high pressure. These diamonds are generally small, perfect to semiperfect octahedra, and are used to polish other diamonds. Their hardness is associated with the crystal growth form, which is single-stage crystal growth. [29] The extreme hardness and high value of diamond means that gems are typically polished slowly, using painstaking traditional techniques and greater attention to detail than is the case with most other gemstones;[30] these tend to result in extremely flat, highly polished facets with exceptionally sharp facet edges. Diamonds also possess an extremely high refractive index and fairly high dispersion. Most other diamonds show more evidence of multiple growth stages, which produce inclusions, flaws, and defect planes in the crystal lattice, all of which affect their hardness. Hardness tests are infrequently used in practical gemology because of their potentially destructive nature. Unlike many other gems, it is well-suited to daily wear because of its resistance to scratching-perhaps contributing to its popularity as the preferred gem in engagement or wedding rings, which are often worn every day. Taken together, these factors affect the overall appearance of a polished diamond and most diamantaires still rely upon skilled use of a loupe (magnifying glass) to identify diamonds “by eye”.

Buy Diamonds In Thailand Free

Toughness

Diamond has a cleavage plane.

Somewhat related to hardness is another mechanical property toughness, which is a material’s ability to resist breakage from forceful impact.5-10 MPa· [36][37] Is therefore more fragile in some orientations than others. [34] “Impact toughness” is one of the main indexes to measure the quality of synthetic industrial diamonds.[35] This exceptionally high value, along with the hardness and transparency of diamond, are the reasons that diamond anvil cells are the main tool for high pressure experiments. m1/2. As with any material, the macroscopic geometry of a diamond contributes to its resistance to breakage. Diamond has a cleavage plane. Diamond cutters use this attribute to cleave some stones, prior to faceting. [37] Much higher pressures may be possible with nanocrystalline diamonds.

Buy Synthetic Diamonds

Elasticity and tensile strength

Usually, attempting to deform bulk diamond crystal by tension or bending results in brittle fracture. However, when single crystalline diamond is in the form of micro/nanoscale wires or needles (~100-300 nanometers in diameter, micrometers long), they can be elastically stretched by as much as 9-10 percent tensile strain without failure,[38] with a maximum local tensile stress of ~89 to 98 GPa,[39] very close to the theoretical limit for this material.[40]

Buy Diamonds In Africa

Electrical conductivity

Other specialized applications also exist or are being developed, including use as semiconductors: some blue diamonds are natural semiconductors, in contrast to most diamonds, which are excellent electrical insulators. [41] The conductivity and blue color originate from boron impurity. Boron substitutes for carbon atoms in the diamond lattice, donating a hole into the valence band.

Buy Diamonds In Thailand Online

Substantial conductivity is commonly observed in nominally undoped diamond grown by chemical vapor deposition. This conductivity is associated with hydrogen-related species adsorbed at the surface, and it can be removed by annealing or other surface treatments.[42][43]

Thin needles of diamond can be made to vary their electronic band gap from the normal 5.6 eV to near zero by selective mechanical deformation.[44]

High-purity diamond wafers 5 cm in diameter exhibit perfect resistance in one direction and perfect conductance in the other, creating the possibility of using them for quantum data storage. [45] The diamond was grown on a stepped substrate, which eliminated cracking. The material contains only 3 parts per million of nitrogen.

Surface property

Diamonds are naturally lipophilic and hydrophobic, which means the diamonds’ surface cannot be wet by water, but can be easily wet and stuck by oil. [46] This property can be utilized to extract diamonds using oil when making synthetic diamonds. However, when diamond surfaces are chemically modified with certain ions, Buy Real Diamonds Online they are expected to become so hydrophilic that they can stabilize multiple layers of water ice at human body temperature.

The surface of diamonds is partially oxidized. [47] That is to say, this heat treatment partially removes oxygen-containing functional groups. But diamonds (sp3C) are unstable against high temperature (above about 400 °C (752 °F)) under atmospheric pressure. Thus, diamonds should be reduced below this temperature. The structure gradually changes into sp2C above this temperature. The oxidized surface can be reduced by heat treatment under hydrogen flow.

Buy Real Diamonds

Chemical stability

At room temperature, diamonds do not react with any chemical reagents including strong acids and bases.

Buy Blood Diamonds

In an atmosphere of pure oxygen, diamond has an ignition point that ranges from 690 °C (1,274 °F) to 840 °C (1,540 °F); smaller crystals tend to burn more easily. It increases in temperature from red to white heat and burns with a pale blue flame, and continues to burn after the source of heat is removed. By contrast, in air the combustion will cease as soon as the heat is removed because the oxygen is diluted with nitrogen. A clear, flawless, transparent diamond is completely converted to carbon dioxide; any impurities will be left as ash. [51] [48] Heat generated from cutting a diamond will not ignite the diamond,[49] and neither will a cigarette lighter,[50] but house fires and blow torches are hot enough. Jewelers must be careful when molding the metal in a diamond ring.

Diamond powder of an appropriate grain size (around 50 microns) burns with a shower of sparks after ignition from a flame. [52] Diamond also reacts with fluorine gas above about 700 °C (1,292 °F). Consequently, pyrotechnic compositions based on synthetic diamond powder can be prepared. The resulting sparks are of the usual red-orange color, comparable to charcoal, but show a very linear trajectory which is explained by their high density.

Color

Diamond has a wide band gap of 5.5 eV corresponding to the deep ultraviolet wavelength of 225 nanometers. Transition metals nickel and cobalt, which are commonly used for growth of synthetic diamond by high-pressure high-temperature techniques, have been detected in diamond as individual atoms; the maximum concentration is 0.01% for nickel[53] and even less for cobalt. Virtually any element can be introduced to diamond by ion implantation. Appear as a clear colorless crystal. The diamond crystal lattice is exceptionally strong, and only atoms of nitrogen, boron, and hydrogen can be introduced into diamond during the growth at significant concentrations (up to atomic percents). This means that pure diamond should transmit visible light. [54] Colors in diamond originate from lattice defects and impurities.

Most diamond impurities replace a carbon atom in the crystal lattice, known as a carbon flaw.

Nitrogen is by far the most common impurity found in gem diamonds and is responsible for the yellow and brown color in diamonds. Yellow diamonds of high color saturation or a different color, such as pink or blue, are called fancy colored diamonds and fall under a different grading scale.56-carat (7.03-carat (1.406 g) blue diamond fetched the highest price per carat ever paid for a diamond when it was sold at auction for 10.97 million euros, or US$9.5 million at the time). [34] “Black”, or carbonado, diamonds are not truly black, but rather contain numerous dark inclusions that give the gems their dark appearance. Colored diamonds contain impurities or structural defects that cause the coloration, while pure or nearly pure diamonds are transparent and colorless. The most common impurity, nitrogen, causes a slight to intense yellow coloration depending upon the type and concentration of nitrogen present. Most diamond impurities replace a carbon atom in the crystal lattice, known as a carbon flaw. Boron is responsible for the blue color. [60] Plastic deformation is the cause of color in some brown[56] and perhaps pink and red diamonds.[57] In order of increasing rarity, yellow diamond is followed by brown, colorless, then by blue, green, black, pink, orange, purple, and red. [59] That record was, however, beaten the same year: a 5-carat (1.0 g) vivid pink diamond was sold for $10. [55] Color in diamond has two additional sources: irradiation (usually by alpha particles), that causes the color in green diamonds, and plastic deformation of the diamond crystal lattice. [34] The Gemological Institute of America (GIA) classifies low saturation yellow and brown diamonds as diamonds in the normal color range, and applies a grading scale from “D” (colorless) to “Z” (light yellow).

Impurities in natural diamonds are due to the presence of natural minerals and oxides.

Clarity

Clarity is one of the 4C’s (color, clarity, cut and carat weight) that helps in identifying the quality of diamonds. [61] Inclusions in diamond can be extracted by optical methods. Impurities in natural diamonds are due to the presence of natural minerals and oxides. [62] The clarity scale grades the diamond based on the color, size, location of impurity and quantity of clarity visible under 10x magnification. The process is to take pre-enhancement images, identifying the inclusion removal part and finally removing the diamond facets and noises.

Buy Diamonds In Thailand 2017

Fluorescence

[63] Incandescent lighting will not cause a diamond to fluoresce. Diamonds can fluoresce in a variety of colours including blue (most common), orange, yellow, white, green and very rarely red and purple. Although the causes are not well understood, variations in the atomic structure, such as the number of nitrogen atoms present are thought to contribute to the phenomenon.

Buy Diamonds Jewellery Online

Thermal Conductivity

[64] Their high refractive index is also indicative, but other materials have similar refractivity.

Geology

Diamonds are extremely rare, with concentrations of at most parts per billion in source rock. Loose diamonds are also found along existing and ancient shorelines, where they tend to accumulate because of their size and density. [68] These have evenly distributed microdiamonds that show no sign of transport by magma. [20] Before the 20th century, most diamonds were found in alluvial deposits. [66] Impact-type microdiamonds can be used as an indicator of ancient impact craters. Some blocks of the crust, or terranes, have been buried deep enough as the crust thickened so they experienced ultra-high-pressure metamorphism. In addition, when meteorites strike the ground, the shock wave can produce high enough temperatures and pressures for microdiamonds and nanodiamonds to form. However, there are other sources.

Buy Diamonds In Thaïlandaise

A common misconception is that diamonds form from highly compressed coal. It is possible that diamonds can form from coal in subduction zones, but diamonds formed in this way are rare, and the carbon source is more likely carbonate rocks and organic carbon in sediments, rather than coal. [69][70] Coal is formed from buried prehistoric plants, and most diamonds that have been dated are far older than the first land plants.

Surface distribution

5 billion years or more. The Argyle diamond mine in Australia, the largest producer of diamonds by weight in the world, is located in a mobile belt, also known as an orogenic belt,[72] a weaker zone surrounding the central craton that has undergone compressional tectonics. Instead of kimberlite, the host rock is lamproite.[66]

It is hybrid rock with a chaotic mixture of small minerals.

Kimberlites can be found in narrow (1 to 4 meters) dikes and sills, and in pipes with diameters that range from about 75 m to 1.5 km. The composition forms a continuum with carbonatites, but the latter have too much oxygen for carbon to exist in a pure form. It is hybrid rock with a chaotic mixture of small minerals. Rock fragments (clasts) up to the size of watermelons. They are a mixture of xenocrysts and xenoliths (minerals and rocks carried up from the lower crust and mantle), pieces of surface rock, altered minerals such as serpentine, and new minerals that crystallized during the eruption. Instead, it is locked up in the mineral calcite (CaCO
3).[66] Fresh rock is dark bluish green to greenish gray, but after exposure rapidly turns brown and crumbles. The texture varies with depth.

Buy Loose Diamonds

All three of the diamond-bearing rocks (kimberlite, lamproite and lamprophyre) lack certain minerals (melilite and kalsilite) that are incompatible with diamond formation. They are all derived from magma types that erupt rapidly from small amounts of melt, are rich in volatiles and magnesium oxide, and are less oxidizing than more common mantle melts such as basalt. [66] These characteristics allow the melts to carry diamonds to the surface before they dissolve.

Modeling of the geological history.

Exploration

Kimberlite pipes can be difficult to find. In any case, kimberlites are often covered with vegetation, sediments, soils, or lakes. Tend to have lower topographic relief than surrounding rock. Modeling of the geological history. If they are visible in outcrops, the diamonds are never visible because they are so rare. They weather quickly (within a few years after exposure). In modern searches, geophysical methods such as aeromagnetic surveys, electrical resistivity, and gravimetry, help identify promising regions to explore. Then surveyors must go to the area and collect samples, looking for kimberlite fragments or indicator minerals. This is aided by isotopic dating. [66] However, indicator minerals can be misleading; a better approach is geothermobarometry, where the compositions of minerals are analyzed as if they were in equilibrium with mantle minerals. The latter have compositions that reflect the conditions where diamonds form, such as extreme melt depletion or high pressures in eclogites.

Finding kimberlites requires persistence, and only a small fraction contain diamonds that are commercially viable. Since existing mines have lifetimes of as little as 25 years, there could be a shortage of new diamonds in the future.[66]

The kimberlites themselves are much younger.

Ages

Diamonds are dated by analyzing inclusions using the decay of radioactive isotopes. No kimberlite has erupted in human history. Thus, the kimberlites formed independently of the diamonds and served only to transport them to the surface. The kimberlites themselves are much younger. Depending on the elemental abundances, one can look at the decay of rubidium to strontium, samarium to neodymium, uranium to lead, argon-40 to argon-39, or rhenium to osmium. [66] The reason for the lack of older kimberlites is unknown, but it suggests there was some change in mantle chemistry or tectonics. Those found in kimberlites have ages ranging from 1 to 3.5 billion years, and there can be multiple ages in the same kimberlite, indicating multiple episodes of diamond formation. [20][66] Kimberlites are also much younger than the cratons they have erupted through.

Origin in mantle

Most gem-quality diamonds come from depths of 150-250 km in the lithosphere. Such depths occur below cratons in mantle keels, the thickest part of the lithosphere. These regions have high enough pressure and temperature to allow diamonds to form and they are not convecting, so diamonds can be stored for billions of years until a kimberlite eruption samples them. [66]

Host rocks in a mantle keel include harzburgite and lherzolite, two type of peridotite. The most dominant rock type in the upper mantle, peridotite is an igneous rock consisting mostly of the minerals olivine and pyroxene; it is low in silica and high in magnesium. [20] However, diamonds in peridotite rarely survive the trip to the surface. [66] Another common source that does keep diamonds intact is eclogite, a metamorphic rock that typically forms from basalt as an oceanic plate plunges into the mantle at a subduction zone.

A smaller fraction of diamonds (about 150 have been studied) come from depths of 330-660 km, a region that includes the transition zone. [20] A similar proportion of diamonds comes from the lower mantle at depths between 660 and 800 km. They formed in eclogite but are distinguished from diamonds of shallower origin by inclusions of majorite (a form of garnet with excess silicon).

Can You Buy Diamonds In Thailand

Diamond is thermodynamically stable at high pressures and temperatures, with the phase transition from graphite occurring at greater temperatures as the pressure increases.5 gigapascals, corresponding to depths of 150 kilometers or greater. Thus, the deeper origin of some diamonds may reflect unusual growth environments. The inclusions formed at depths between 400 and 800 km, straddling the upper and lower mantle, and provide evidence for water-rich fluid at these depths. At depths greater than 240 km, iron-nickel metal phases are present and carbon is likely to be either dissolved in them or in the form of carbides. [75][76] In subduction zones, which are colder, it becomes stable at temperatures of 800 °C and pressures of 3.5 gigapascals.

Carbon has two stable isotopes, 12C and 13C, in a ratio of approximately 99:1 by mass.

Carbon sources

The mantle has roughly one billion gigatonnes of carbon (for comparison, the atmosphere-ocean system has about 44,000 gigatonnes). The fraction is generally compared to a standard sample using a ratio δ13C expressed in parts per thousand. It can also be altered by surface processes like photosynthesis. On the surface, organic sediments have an average of −25 while carbonates have an average of 0.[20] [77] Carbon has two stable isotopes, 12C and 13C, in a ratio of approximately 99:1 by mass. Common rocks from the mantle such as basalts, carbonatites, and kimberlites have ratios between −8 and −2.

Populations of diamonds from different sources have distributions of δ13C that vary markedly. This variability implies that they are not formed from carbon that is primordial (having resided in the mantle since the Earth formed). [66] Peridotitic diamonds are mostly within the typical mantle range; eclogitic diamonds have values from −40 to +3, although the peak of the distribution is in the mantle range. Instead, they are the result of tectonic processes, although (given the ages of diamonds) not necessarily the same tectonic processes that act in the present.

Formation and growth

Diamonds in the mantle form through a metasomatic C-O-H-N-S fluid or melt dissolves minerals in a rock. Replaces them with new minerals. (The vague term C-O-H-N-S is commonly used because the exact composition is not known.) Diamonds form from this fluid either by reduction of oxidized carbon (e.g., CO2 or CO3) or oxidation of a reduced phase such as methane.[20]

Using probes such as polarized light, photoluminescence, and cathodoluminescence, a series of growth zones can be identified in diamonds. Diamonds from below the lithosphere have a more irregular, almost polycrystalline texture, reflecting the higher temperatures and pressures as well as the transport of the diamonds by convection. [66] The characteristic pattern in diamonds from the lithosphere involves a nearly concentric series of zones with very thin oscillations in luminescence and alternating episodes where the carbon is resorbed by the fluid and then grown again.

Transport to the surface

Geological evidence supports a model in which kimberlite magma rises at 4-20 meters per second, creating an upward path by hydraulic fracturing of the rock. As the eruption wanes, there is pyroclastic phase and then metamorphism and hydration produces serpentinites. Then, at lower pressures, the rock is eroded, forming a pipe and producing fragmented rock (breccia). [66] At the surface, the initial eruption explodes out through fissures at high speeds (over 200 m/s (450 mph)). As the pressure decreases, a vapor phase exsolves from the magma, and this helps to keep the magma fluid.

Buy Diamonds Rings Online

Double diamonds

In rare cases, diamonds have been found that contain a cavity within which is a second diamond.[79]

In space

In meteorites, about three percent of the carbon is in the form of nanodiamonds, having diameters of a few nanometers. [81][82][83] Some extrasolar planets may be almost entirely composed of diamond. Sufficiently small diamonds can form in the cold of space because their lower surface energy makes them more stable than graphite. [84]

Buy Loose Certified Diamonds

Diamonds may exist in carbon-rich stars, particularly white dwarfs. One theory for the origin of carbonado, the toughest form of diamond, is that it originated in a white dwarf or supernova. [87] [85][86] Diamonds formed in stars may have been the first minerals.

Buy Single Diamonds

Industry

The most familiar uses of diamonds today are as gemstones used for adornment, and as industrial abrasives for cutting hard materials. Industrial-grade diamonds value diamonds differently. The markets for gem-grade.

Gem-grade diamonds

The dispersion of white light into spectral colors is the primary gemological characteristic of gem diamonds. Four characteristics, known informally as the four Cs, are now commonly used as the basic descriptors of diamonds: these are its mass in carats (a carat being equal to 0.2 grams), cut (quality of the cut is graded according to proportions, symmetry and polish), color (how close to white or colorless; for fancy diamonds how intense is its hue), and clarity (how free is it from inclusions). In the 20th century, experts in gemology developed methods of grading diamonds and other gemstones based on the characteristics most important to their value as a gem. A large, flawless diamond is known as a paragon. [88]

A large trade in gem-grade diamonds exists. For most of the 20th century over 80% of the world’s rough diamonds passed through De Beers,[94] but by 2001-2009 the figure had decreased to around 45%,[95] and by 2013 the company’s market share had further decreased to around 38% in value terms and even less by volume. One contributory factor is the geological nature of diamond deposits: several large primary kimberlite-pipe mines each account for significant portions of market share (such as the Jwaneng mine in Botswana, which is a single large-pit mine that can produce between 12,500,000 and 15,000,000 carats (2,500 and 3,000 kg) of diamonds per year[90]). Secondary alluvial diamond deposits, on the other hand, tend to be fragmented amongst many different operators because they can be dispersed over many hundreds of square kilometers (e.g., alluvial deposits in Brazil). Although most gem-grade diamonds are sold newly polished, there is a well-established market for resale of polished diamonds (e.g. pawnbroking, auctions, second-hand jewelry stores, diamantaires, bourses, etc.). [96] De Beers sold off the vast majority of its diamond stockpile in the late 1990s – early 2000s[97] and the remainder largely represents working stock (diamonds that are being sorted before sale).[98] This was well documented in the press[99] but remains little known to the general public.[101] Alrosa had to suspend their sales in October 2008 due to the global energy crisis,[citation needed] but the company reported that it had resumed selling rough diamonds on the open market by October 2009.

[106] The cutting and polishing of rough diamonds is a specialized skill that is concentrated in a limited number of locations worldwide.[91]

Diamonds prepared as gemstones are sold on diamond exchanges called bourses. There are 28 registered diamond bourses in the world. [108] Diamonds can be sold already set in jewelry, or sold unset (“loose”). [107] Bourses are the final tightly controlled step in the diamond supply chain; wholesalers and even retailers are able to buy relatively small lots of diamonds at the bourses, after which they are prepared for final sale to the consumer.

Cutting

Mined rough diamonds are converted into gems through a multi-step process called “cutting”. [110] Some of them may be considered as classical, such as round, pear, marquise, oval, hearts and arrows diamonds, etc.[111] Its final goal is to produce a faceted jewel where the specific angles between the facets would optimize the diamond luster, that is dispersion of white light, whereas the number and area of facets would determine the weight of the final product. Therefore, diamond cutting is traditionally considered as a delicate procedure requiring skills, scientific knowledge, tools and experience. Can be of the order of 50%.[109] Several possible shapes are considered, but the final decision is often determined not only by scientific, but also practical considerations. Diamonds are extremely hard, but also brittle and can be split up by a single blow. The weight reduction upon cutting is significant. For example, the diamond might be intended for display or for wear, in a ring or a necklace, singled or surrounded by other gems of certain color and shape.

The most time-consuming part of the cutting is the preliminary analysis of the rough stone. It needs to address a large number of issues, bears much responsibility, and therefore can last years in case of unique diamonds. The following issues are considered:

Alternatively, it can be cut with a diamond saw, which is a more reliable but tedious procedure.

– The hardness of diamond and its ability to cleave strongly depend on the crystal orientation. [110][112]

After initial cutting, the diamond is shaped in numerous stages of polishing. [113] After polishing, the diamond is reexamined for possible flaws, either remaining or induced by the process. – The diamond can be split by a single, well calculated blow of a hammer to a pointed tool, which is quick, but risky. [29] The associated technique is well developed; it is considered as a routine and can be performed by technicians. Alternatively, it can be cut with a diamond saw, which is a more reliable but tedious procedure. The cutter has to decide which flaws are to be removed by the cutting and which could be kept. Unlike cutting, which is a responsible but quick operation, polishing removes material by gradual erosion and is extremely time-consuming. Remaining non-diamond inclusions are removed through laser drilling and filling of the voids produced. Those flaws are concealed through various diamond enhancement techniques, such as repolishing, crack filling, or clever arrangement of the stone in the jewelry. – Most diamonds contain visible non-diamond inclusions and crystal flaws.

Buy Man Made Diamonds

Marketing

Marketing has significantly affected the image of diamond as a valuable commodity.

Buy Diamonds In Thailande.Com

N. W. N. W.[115] The campaign lasted for decades but was effectively discontinued by early 2011.[115] The campaign was perhaps best captured by the slogan “a diamond is forever”.

Brown-colored diamonds constituted a significant part of the diamond production, and were predominantly used for industrial purposes. They were seen as worthless for jewelry (not even being assessed on the diamond color (Suggested Website) scale).[121]

Industrial-grade diamonds

Eighty percent of mined diamonds (equal to about 135,000,000 carats (27,000 kg) annually) are unsuitable for use as gemstones and are used industrially. Approximately 90% of diamond grinding grit is currently of synthetic origin.[123]

The boundary between gem-quality diamonds and industrial diamonds is poorly defined and partly depends on market conditions (for example, if demand for polished diamonds is high, some lower-grade stones will be polished into low-quality or small gemstones rather than being sold for industrial use). Within the category of industrial diamonds, there is a sub-category comprising the lowest-quality, mostly opaque stones, which are known as bort.[124]

Buy Diamonds Las Vegas

Industrial use of diamonds has historically been associated with their hardness, which makes diamond the ideal material for cutting and grinding tools. [125] Diamond is not suitable for machining ferrous alloys at high speeds, as carbon is soluble in iron at the high temperatures created by high-speed machining, leading to greatly increased wear on diamond tools compared to alternatives. Less expensive industrial-grade diamonds (bort) with more flaws and poorer color than gems, are used for such purposes. [126] As the hardest known naturally occurring material, diamond can be used to polish, cut, or wear away any material, including other diamonds. Common industrial applications of this property include diamond-tipped drill bits and saws, and the use of diamond powder as an abrasive.

Specialized applications include use in laboratories as containment for high-pressure experiments (see diamond anvil cell), high-performance bearings, and limited use in specialized windows. The high thermal conductivity of diamond makes it suitable as a heat sink for integrated circuits in electronics. [127] [124] With the continuing advances being made in the production of synthetic diamonds, future applications are becoming feasible.

Buy Loose Diamonds Nyc

Mining

The mining and distribution of natural diamonds are subjects of frequent controversy such as concerns over the sale of blood diamonds or conflict diamonds by African paramilitary groups.[129] The diamond supply chain is controlled by a limited number of powerful businesses, and is also highly concentrated in a small number of locations around the world.

Only a very small fraction of the diamond ore consists of actual diamonds. The ore is crushed, during which care is required not to destroy larger diamonds, and then sorted by density. Before the use of X-rays became commonplace,[109] the separation was done with grease belts; diamonds have a stronger tendency to stick to grease than the other minerals in the ore.[34]

[134] Production has increased over time and now an accumulated total of 4,500,000,000 carats (900,000 kg) have been mined since that date.[135] Twenty percent of that amount has been mined in the last five years, and during the last 10 years, nine new mines have started production; four more are waiting to be opened soon.[135]

In the U.S.S.[123] Diamond prospectors continue to search the globe for diamond-bearing kimberlite and lamproite pipes. [140] This is done by requiring diamond-producing countries to provide proof that the money they make from selling the diamonds is not used to fund criminal or revolutionary activities. Diamonds sold through this process are known as conflict diamonds or blood diamonds.

The Canadian Government has set up a body known as the Canadian Diamond Code of Conduct[142] to help authenticate Canadian diamonds.[143]

Mineral resource exploitation in general causes irreversible environmental damage, which must be weighed against the socio-economic benefits to a country.[144]

Synthetics, simulants, and enhancements

Synthetics

The gemological and industrial uses of diamond have created a large demand for rough stones. [65] It is possible to make colorless synthetic gemstones that, on a molecular level, are identical to natural stones and so visually similar that only a gemologist with special equipment can tell the difference. [145] However, in recent years it has become possible to produce gem-quality synthetic diamonds of significant size. This demand has been satisfied in large part by synthetic diamonds, which have been manufactured by various processes for more than half a century.

The majority of commercially available synthetic diamonds are yellow and are produced by so-called high-pressure high-temperature (HPHT) processes. Other colors may also be reproduced such as blue, green or pink, Buy Certified Diamonds – http://diamonds.backtoglamour.com/2020/06/02/six-solid-reasons-to-avoid-buy-pink-diamonds-online/ – which are a result of the addition of boron or from irradiation after synthesis. [147] [146] The yellow color is caused by nitrogen impurities.

Another popular method of growing synthetic diamond is chemical vapor deposition (CVD). [148] This method is mostly used for coatings, but can also produce single crystals several millimeters in size (see picture). [128] It involves feeding a mixture of gases (typically 1 to 99 methane to hydrogen) into a chamber and splitting them into chemically active radicals in a plasma ignited by microwaves, hot filament, arc discharge, welding torch, or laser.

As of 2010, nearly all 5,000 million carats (1,000 tonnes) of synthetic diamonds produced per year are for industrial use. Around 50% of the 133 million carats of natural diamonds mined per year end up in industrial use.01% of natural diamonds are fancy-colored, while most synthetic diamonds are colored in some way.[150]

Synthetic diamonds of various colors grown by the high-pressure high-temperature technique

Colorless gem cut from diamond grown by chemical vapor deposition

Simulants

A diamond simulant is a non-diamond material that is used to simulate the appearance of a diamond, and may be referred to as diamante. [151] Both are produced synthetically. The gemstone moissanite (silicon carbide) can be treated as a diamond simulant, though more costly to produce than cubic zirconia. Cubic zirconia is the most common.

Enhancements

Diamond enhancements are specific treatments performed on natural or synthetic diamonds (usually those already cut and polished into a gem), which are designed to better the gemological characteristics of the stone in one or more ways. These include laser drilling to remove inclusions, application of sealants to fill cracks, treatments to improve a white diamond’s color grade, and treatments to give fancy color to a white diamond.[152]

Coatings are increasingly used to give a diamond simulant such as cubic zirconia a more “diamond-like” appearance. One such substance is diamond-like carbon-an amorphous carbonaceous material that has some physical properties similar to those of the diamond. Advertising suggests that such a coating would transfer some of these diamond-like properties to the coated stone, hence enhancing the diamond simulant. [153]

This test is destructive, as a diamond can scratch another diamond, and is rarely used nowadays.

Identification

Early diamond identification tests included a scratch test relying on the superior hardness of diamond. These probes consist of a pair of battery-powered thermistors mounted in a fine copper tip. Instead, diamond identification relies on its superior thermal conductivity. [154] This test is destructive, as a diamond can scratch another diamond, and is rarely used nowadays. One thermistor functions as a heating device while the other measures the temperature of the copper tip: if the stone being tested is a diamond, it will conduct the tip’s thermal energy rapidly enough to produce a measurable temperature drop. Electronic thermal probes are widely used in the gemological centers to separate diamonds from their imitations. This test takes about two to three seconds.

Whereas the thermal probe can separate diamonds from most of their simulants, distinguishing between various types of diamond, for example synthetic or natural, irradiated or non-irradiated, etc., requires more advanced, optical techniques. [155] “Perfect” crystals (at the atomic lattice level) have never been found, so both natural and synthetic diamonds always possess characteristic imperfections, arising from the circumstances of their crystal growth, that allow them to be distinguished from each other.[156] They can also identify the vast majority of treated natural diamonds. Optical techniques can distinguish between natural diamonds and synthetic diamonds. Those techniques are also used for some diamonds simulants, such as silicon carbide, which pass the thermal conductivity test.

Laboratories use techniques such as spectroscopy, microscopy, and luminescence under shortwave ultraviolet light to determine a diamond’s origin.[155] They also use specially made instruments to aid them in the identification process. Two screening instruments are the DiamondSure and the DiamondView[157]

Several methods for identifying synthetic diamonds can be performed, depending on the method of production and the color of the diamond. D-J colored diamonds can be screened through the Swiss Gemmological Institute’s[158] Diamond Spotter.[156] Similarly, natural diamonds usually have minor imperfections and flaws, such as inclusions of foreign material, that are not seen in synthetic diamonds. CVD diamonds can usually be identified by an orange fluorescence.

Screening devices based on diamond type detection can be used to make a distinction between diamonds that are certainly natural and diamonds that are potentially synthetic. Those potentially synthetic diamonds require more investigation in a specialized lab.

Etymology, earliest use and composition discovery

The name diamond is derived from Ancient Greek: ἀδάμας (adámas), ‘proper, unalterable, unbreakable, untamed’, from ἀ- (a-), ‘not’ + Ancient Greek: δαμάω (damáō), ‘to overpower, tame’. [160][161] The popularity of diamonds has risen since the 19th century because of increased supply, improved cutting and polishing techniques, growth in the world economy, and innovative and successful advertising campaigns. [30] Their usage in engraving tools also dates to early human history. [163] By demonstrating that burning diamond and graphite releases the same amount of gas, he established the chemical equivalence of these substances.

See also

Minerals portal

Deep carbon cycle
Diamondoid
List of diamonds List of largest rough diamonds

Citations

^ “IMA-CNMNC approved mineral symbols”. Mineralogical Magazine. 85 (3): 291-320. Bibcode:2021MinM…85..291W. doi:10.1180/mgm.2021.43.
^ a b “Diamond”. Mindat.
^ “Diamond”. WebMineral.
^ “Polymorphism of carbon”.). Graphite and precursors. Gordon & Breach. JCK. Jckonline.com. Archived from the original on January 7, 2013. Retrieved September 9, 2012.
^ a b Epstein EJ (1982).”. The Atlantic. Retrieved May 5, 2009.
^ Bates R (January 14, 2011). “Interview with Forevermark CEO”. JCK. Jckonline.com. Archived from the original on November 28, 2012. Retrieved September 9, 2012.
^ Harlow GE (1998). The nature of diamonds. Cambridge University Press. p. 34. ISBN 978-0-521-62935-5.
^ Kogel JE (2006). Industrial minerals & rocks. Society for Mining, Metallurgy, and Exploration (U.S.). p. 416. ISBN 978-0-87335-233-8.
^ “The Australian Diamond Industry”. Archived from the original on July 16, 2009. Retrieved August 4, 2009.
^ Erlich E, Hausel DW (2002). Diamond deposits: origin, exploration, and history of discovery. SME. p. 158. ISBN 978-0-87335-213-0.
^ “Diamond: The mineral Diamond information and pictures”. minerals.net. Retrieved September 24, 2014.
^ a b c “Industrial Diamonds Statistics and Information”. United States Geological Survey. Retrieved May 5, 2009.
^ a b Spear KE, Dismukes JP (1994). Synthetic Diamond: Emerging CVD Science and Technology. Wiley-IEEE. p. 628. ISBN 978-0-471-53589-8.
^ Holtzapffel C (1856). Turning And Mechanical Manipulation. Holtzapffel & Co. pp. 176-178. ISBN 978-1-879335-39-4.
^ Coelho RT, Yamada S, Aspinwall DK, Wise ML (1995). “The application of polycrystalline diamond (PCD) tool materials when drilling and reaming aluminum-based alloys including MMC”. International Journal of Machine Tools and Manufacture. 35 (5): 761-774. doi:10.1016/0890-6955(95)93044-7.
^ Sakamoto M, Endriz JG, Scifres DR (1992). “120 W CW output power from monolithic AlGaAs (800 nm) laser diode array mounted on diamond heatsink”. Electronics Letters. 28 (2): 197-199. Bibcode:1992ElL….28..197S. doi:10.1049/el:19920123.
^ a b Yarnell A (2004). “The Many Facets of Man-Made Diamonds”. Chemical and Engineering News. 82 (5): 26-31. doi:10.1021/cen-v082n005.p026.
^ a b “Conflict Diamonds”. United Nations. March 21, 2001. Archived from the original on March 9, 2010. Retrieved May 5, 2009.
^ Catelle WR (1911). The Diamond. John Lane Co. p. 159.
^ a b c Hershey W (1940). The Book of Diamonds. New York: Hearthside Press. pp. 22-28. ISBN 978-1-4179-7715-4.
^ Ball V (1881). “1”. Diamonds, Gold and Coal of India. London: Trübner & Co. p. 1. Ball was a geologist in British service.
^ “Biggest diamond found in Panna”. Mail Today. July 1, 2010. Archived from the original on July 7, 2011.
^ Shillington K (2005). Encyclopedia of African history. CRC Press. p. 767. ISBN 978-1-57958-453-5.
^ a b Janse AJ (2007). “Global Rough Diamond Production Since 1870”. Gems & Gemology. 43 (2): 98-119. doi:10.5741/GEMS.43.2.98.
^ a b Lorenz V (2007). “Argyle in Western Australia: The world’s richest diamantiferous pipe; its past and future”. Gemmologie, Zeitschrift der Deutschen Gemmologischen Gesellschaft. 56 (1-2): 35-40.
^ a b Cooke S (October 17, 2004). “Microscopic diamond found in Montana”. The Montana Standard. Archived from the original on January 21, 2005. Retrieved May 5, 2009.
^ Marshall S, Shore J (2004). “The Diamond Life”. Guerrilla News Network. Archived from the original on January 26, 2007. Retrieved March 21, 2007.
^ Shigley JE, Chapman J, Ellison RK (2001). “Discovery and Mining of the Argyle Diamond Deposit, Australia” (PDF). Gems & Gemology. 37 (1): 26-41. doi:10.5741/GEMS.37.1.26. Archived from the original (PDF) on September 30, 2009. Retrieved February 20, 2010.
^ a b Basedau M, Mehler A (2005). Resource politics in Sub-Saharan Africa. GIGA-Hamburg. pp. 305-313. ISBN 978-3-928049-91-7.
^ World Federation of Diamond Bourses (WFDB) and International Diamond Manufacturers Association: Joint Resolution of 19 July 2000. World Diamond Council. July 19, 2000. ISBN 978-90-04-13656-4. Retrieved November 5, 2006.
^ “Voluntary Code of Conduct For Authenticating Canadian Diamond Claims” (PDF). Canadian Diamond Code Committee. 2006. Archived from the original (PDF) on February 29, 2012. Retrieved October 30, 2007.
^ Kjarsgaard BA, Levinson AA (2002). “Diamonds in Canada”. Gems and Gemology. 38 (3): 208-238. doi:10.5741/GEMS.38.3.208.
^ A meta-analysis of the environmental impact specific to diamond mining is in Oluleye G. Environmental Impacts of Mined Diamonds (PDF) (Report). Imperial College London Consultants. Archived (PDF) from the original on 2021-12-03. Retrieved 2022-07-01.
^ a b c “The Global Diamond Industry: Lifting the Veil of Mystery” (PDF). Bain & Company. Archived (PDF) from the original on 2012-01-31. Retrieved January 14, 2012.
^ Shigley JE, Abbaschian R (2002). “Gemesis Laboratory Created Diamonds”. Gems & Gemology. 38 (4): 301-309. doi:10.5741/GEMS.38.4.301.
^ Shigley JE, Shen AH, Breeding CM, McClure SF, Shigley JE (2004). “Lab Grown Colored Diamonds from Chatham Created Gems”. Gems & Gemology. 40 (2): 128-145. doi:10.5741/GEMS.40.2.128.
^ Werner M, Locher R (1998). “Growth and application of undoped and doped diamond films”. Reports on Progress in Physics. 61 (12): 1665-1710. Bibcode:1998RPPh…61.1665W. doi:10.1088/0034-4885/61/12/002. S2CID 250878100.
^ Pisani B (August 27, 2012). “The Business of Diamonds, From Mining to Retail”. CNBC.
^ Kogel JE (2006). Industrial Minerals & Rocks. SME. pp. 426-430. ISBN 978-0-87335-233-8.
^ O’Donoghue M, Joyner L (2003). Identification of gemstones. Great Britain: Butterworth-Heinemann. pp. 12-19. ISBN 978-0-7506-5512-5.
^ Barnard AS (2000). The diamond formula. Butterworth-Heinemann. p. 115. ISBN 978-0-7506-4244-6.
^ Shigley JE (2007). “Observations on new coated gemstones”. Gemmologie: Zeitschrift der Deutschen Gemmologischen Gesellschaft. 56 (1-2): 53-56.
^ US 4488821, Wenckus JF, “Method and means of rapidly distinguishing a simulated diamond from natural diamond”, published December 18, 1984, assigned to Ceres Electronics Corporation ; U.S. Patent 4,488,821
^ a b Edwards HG, Chalmers GM (2005). Raman spectroscopy in archaeology and art history. Royal Society of Chemistry. pp. 387-394. ISBN 978-0-85404-522-8.
^ a b Welbourn C (2006). “Identification of Synthetic Diamonds: Present Status and Future Developments, Proceedings of the 4th International Gemological Symposium”. Gems and Gemology. 42 (3): 34-35.
^ Donahue PJ (April 19, 2004). “DTC Appoints GIA Distributor of DiamondSure and DiamondView”. Professional Jeweler Magazine. Retrieved March 2, 2009.
^ “SSEF diamond spotter and SSEF illuminator”. SSEF Swiss Gemmological Institute. Archived from the original on June 27, 2009. Retrieved May 5, 2009.
^ Liddell HG, Scott R. “Adamas”. A Greek-English Lexicon. Perseus Project.
^ Pliny the Elder (2004). Natural History: A Selection. Penguin Books. p. 371. ISBN 978-0-14-044413-1.
^ “Chinese made first use of diamond”. BBC News. May 17, 2005. Retrieved March 21, 2007.
^ See: Lavoisier A (2007-10-15) [1772 (part 2)], “Premier mémoire sur la destruction du diamant par le feu” [First memoir on the destruction of diamond by fire], Histoire de l’Académie royale des sciences, avec les Mémoires de Mathématique & de Physique, tirés des registres de cette Académie [History of the Royal – Read More Here https://www.costerdiamonds.com/ – Academy of Sciences, with the Memoirs of Mathematics & Physics, drawn from the records of this academy]] (in French), Gallica: Académie des sciences, pp. 564-591, ISSN 1967-4783, ark:/12148/bpt6k35711, retrieved 2022-07-01

Lavoisier A (2007-10-15) [1772 (part 2)], “Second mémoire sur la destruction du diamant par le feu” [Second memoir on the destruction of diamond by fire], Histoire de l’Académie royale des sciences, avec les Mémoires de Mathématique & de Physique, tirés des registres de cette Académie (in French), Gallica: Académie des sciences, pp. 591-616, ISSN 1967-4783, ark:/12148/bpt6k35711, retrieved 2022-07-01

pp. 7-10. ISBN 978-0-521-65474-6.
^ O’Donoghue M (1997). Synthetic, Imitation and Treated Gemstones. National Jeweler. Archived from the original on July 5, 2009. Retrieved April 26, 2009.
^ “Judgment of the Court of First Instance of 11 July 2007 – Alrosa v Commission”. EUR-Lex. 2007. Retrieved April 26, 2009.
^ “Mining operations”. The De Beers Group. 342 (1664): 233-244. Bibcode:1993RSPTA.342..233C.1098/rsta.1993.0017. pp. 257-260. ISBN 978-1-891389-32-0.
^ “Gone in a Flash”. Popular Science.
^ Polishing of diamond materials: mechanisms, modeling and implementation. 14 (11-12): 1950-1954. Bibcode:2005DRM….14.1950F. doi:10.1016/j.diamond.2005.08.046.
^ “Poly (ADP-ribose) polymerase mediates diabetes-induced retinal neuropathy”. Mediators of Inflammation. 2013 (2): 510451. arXiv:physics/0608014. ^ “Hydrogen-terminated diamond electrodes. II. Redox activity”. Physical Review E. 78 Bibcode:2008PhRvE..78d1603Z. p. 2.16. ISBN 978-0-07-058369-6.
^ a b Solid state physics. p. PMID 16383918.
^ “Carbon under extreme conditions: phase boundaries and electronic properties from first-principles theory”. Proceedings of the National Academy of Sciences of the United States of America. Bibcode:2018Sci…360..264L. doi:10.1126/science.aat5211. S2CID 4986592.
^ “The Optical and Electronic Properties of Semiconducting Diamond”. Philosophical Transactions of the Royal Society A. pp. 34-37. ISBN 978-0-7506-3173-0.
^ Innovative superhard materials and sustainable coatings for advanced manufacturing. p. 17. ISBN 978-0-7506-1674-4.
^ a b c d e f g h i j “Diamond Formation: A Stable Isotope Perspective”. Annual Review of Earth and Planetary Sciences. PMID 33020306.
^ “Two-inch diamond wafers could store a billion Blu-Ray’s worth of data”. New Atlas. Retrieved 2022-04-29.
^ “Diamond stabilization of ice multilayers at human body temperature” (PDF). Physical Review E. pp. 164-165. ISBN 978-981-4241-52-6.
^ “Carbon phase diagram from ab initio molecular dynamics”. Physical Review Letters. 95 (18): 185701. Bibcode:2005PhRvL..95r5701W.1103/PhysRevLett.95.185701. 76. ISBN 978-0-03-083993-1.
^ “Molecular models of porous carbons”.). Chemistry and physics of carbon. pp. 1-2. ISBN 978-1-84996-408-1.
^ a b “The pressure-temperature phase and transformation diagram for carbon; updated through 1994”. Carbon. 34 (2): 141-153. doi:10.1016/0008-6223(96)00170-4. 42 (1): 699-732. Bibcode:2014AREPS..42..699C.1146/annurev-earth-042711-105259. ^ (January 2021). “Achieving large uniform tensile elasticity in microfabricated diamond”. 1-24. ISBN 978-90-5699-228-6.
^ Pierson HO (2012). Handbook of carbon, graphite, diamond, and fullerenes: properties, processing, and applications. Science. 360 (6386): 300-302. Bibcode:2018Sci…360..300B. doi:10.1126/science.aar4165.
^ “On the quest for the strongest materials”. Science. 360 (6386): 264-265. arXiv:2105.05099. Archived from the original on October 25, 2016. Retrieved February 12, 2012.
^ “North America Diamond Sales Show No Sign of Slowing”. A&W diamonds. Archived from the original on January 6, 2009. Retrieved May 5, 2009.
^ a b Pierson HO (1993). Handbook of carbon, graphite, diamond, and fullerenes: properties, processing, and applications. pp. 142-147. ISBN 978-0-85296-785-0.
^ “Diamonds on Demand”. Smithsonian. 39 (3): 52-59.
^ a b Read PG (2005). Gemmology. Osprey Publishing. pp. 82-102. ISBN 978-0-7478-0385-0.
^ “The Classical and Special Shapes of Diamonds”. kristallsmolensk.com. Retrieved July 14, 2015.
^ Prelas MA, Popovici G, Bigelow LK (1998). Handbook of industrial diamonds and diamond films. 2007. Archived from the original on June 13, 2008. Retrieved January 4, 2011.
^ “Media releases – Media Centre – Alrosa”. Alrosa. December 22, 2009. Archived from the original on August 20, 2013. Retrieved January 4, 2011.
^ “Another record profit for BHP”. ABC News. August 22, 2007. Retrieved August 23, 2007.
^ “Our Companies”. Rio Tinto web site. Rio Tinto. Archived from the original on May 11, 2013. Retrieved March 5, 2009.
^ “Introduction | IDC”. internationaldiamondcouncil.org. Retrieved 2022-10-18.
^ a b c Broadman HG, Isik G (2007). Africa’s silk road. William Andrew. 21. ISBN 978-0-8155-1424-4.
^ a b c d e f Harlow GE (1998). The nature of diamonds. Butterworth-Heinemann. pp. 165-166.
^ a b Hazen RM (1999). The diamond makers. S2CID 202574625.
^ “Resistivity of chemical vapor deposited diamond films”. Applied Physics Letters. 55 (10): 975-977. Bibcode:1989ApPhL..55..975L.1063/1.101694. 76 Bibcode:2007PhRvE..76b0501W. doi:10.1103/physreve.76.020501. S2CID 44344503.
^ “Origins of sp(3)C peaks in C1s X-ray Photoelectron Spectra of Carbon Materials”. Analytical Chemistry. 88 (12): 6110-6114. doi:10.1021/acs.analchem.6b01327. ^ a b “Implementation of micro-ball nanodiamond anvils for high-pressure studies above 6 Mbar”. Nature Communications. 3 (1): 1163. Bibcode:2012NatCo…3.1163D. doi:10.1038/ncomms2160. PMID 23093199.
^ a b “Improved diamond anvil cell allows higher pressures than ever before”. Physics World. Nature Communications. Rapaport Magazine. Diamonds.net. Retrieved September 9, 2012.
^ a b JCK Staff (January 26, 2011). “10 Things Rocking the Industry”. William Andrew. p. 280. ISBN 978-0-8155-1339-1.
^ a b James DS (1998). Antique jewellery: its manufacture, materials and design. Science. 371 (6524): 76-78. Bibcode:2021Sci…371…76D. doi:10.1126/science.abc4174.
^ (April 2018). “Ultralarge elastic deformation of nanoscale diamond”. doi:10.1103/PhysRevE.78.041603.
^ “Metallization of diamond”. Proceedings of the National Academy of Sciences of the United States of America. Archived from the original on June 16, 2009. Retrieved April 26, 2009.
^ Even-Zohar C (November 6, 2008). “Crisis Mitigation at De Beers”. Diamond-like glass”. Carbon. 100: 703-709. doi:10.1016/j.carbon.2016.01.068.
^ Wei-Haas M. “Life and Rocks May Have Co-Evolved on Earth”. Smithsonian. Retrieved September 26, 2017.
^ Hesse RW (2007). Jewelrymaking through history. Greenwood Publishing Group. p. 42. ISBN 978-0-313-33507-5.
^ Adiga A (April 12, 2004). “Uncommon Brilliance”. Time. Archived from the original on March 10, 2007. Retrieved November 3, 2008.
^ “Jwaneng”. Debswana. Archived from the original on March 17, 2012. Retrieved March 9, 2012.
^ a b c Tichotsky J (2000). Russia’s Diamond Colony: The Republic of Sakha. Routledge. p. 254. ISBN 978-90-5702-420-7.
^ “Jews Surrender Gem Trade to Indians”. Spiegel Online. May 15, 2006.
^ “The history of the Antwerp Diamond Center”. Antwerp World Diamond Center. 2012-08-16.
^ “Commission Decision of 25 July 2001 declaring a concentration to be compatible with the common market and the EEA Agreement”. Case No COMP/M.2333 – De Beers/LVMH. EUR-Lex. 2003.
^ “Business: Changing facets; Diamonds”. The Economist. Vol. 382, no. 8517. 2007. p. 68.
^ Watch Out For Tipping Points – IDEX’s Memo”. idexonline.com. Retrieved September 24, 2014.
^ “The Elusive Sparcle”. The Gem & Jewellery Export Promotion Council. DIB online. Archived from the original on May 12, 2011. Retrieved April 26, 2009.
^ Even-Zohar C (November 3, 1999). “De Beers to Halve Diamond Stockpile”. Noyes Publications. 40-41. ISBN 978-0-8155-1739-9.
^ “Structure and thermochemistry of diamond”.). The physics of diamond. ^ “Thermodynamic and kinetic approaches of diamond and related nanomaterials formed by laser ablation in liquid”.). Laser ablation in liquids: principles and applications in the preparation of nanomaterials. Vol. 1. pp. 115-117. ISBN 978-0-486-15125-0.
^ “Diamond Care and Cleaning Guide”.
^ “Diamonds are Flammable! How to Safeguard Your Jewelry”. DMIA.
^ Baird CS.”. Science Questions with Surprising Answers. Retrieved 1 August 2019.
^ Lederle F, Koch J, Hübner EG (February 21, 2019). “Colored Sparks”. European Journal of Inorganic Chemistry. 2019 (7): 928-937. doi:10.1002/ejic.201801300. S2CID 104449284.
^ Collins AT, Kanda H, Isoya J, Ammerlaan CA, Van Wyk JA (1998). “Correlation between optical absorption and EPR in high-pressure diamond grown from a nickel solvent catalyst”. Diamond and Related Materials. 7 (2-5): 333-338. Bibcode:1998DRM…..7..333C. doi:10.1016/S0925-9635(97)00270-7.
^ Zaitsev AM (2000). “Vibronic spectra of impurity-related optical centers in diamond”. Physical Review B. 61 (19): 12909-12922. Bibcode:2000PhRvB..6112909Z. doi:10.1103/PhysRevB.61.12909.
^ Walker J (1979). “Optical absorption and luminescence in diamond” (PDF). Reports on Progress in Physics. 42 (10): 1605-1659. Bibcode:1979RPPh…42.1605W. CiteSeerX 10.1.1.467.443. doi:10.1088/0034-4885/42/10/001. S2CID 250857323. Archived (PDF) from the original on 2015-09-06.
^ Hounsome LS, Jones R, Shaw MJ, Briddon PR, Öberg S, Briddon P, Öberg S (2006). “Origin of brown coloration in diamond”. Physical Review B. 73 (12): 125203. Bibcode:2006PhRvB..73l5203H. doi:10.1103/PhysRevB.73.125203.
^ Wise RW (2001). Secrets Of The Gem Trade, The Connoisseur’s Guide To Precious Gemstones. Brunswick House Press. pp. 223-224. ISBN 978-0-9728223-8-1.
^ Khan U (December 10, 2008). “Blue-grey diamond belonging to King of Spain has sold for record 16.3 GBP”. The Daily Telegraph. London. Retrieved March 31, 2010.
^ Nebehay S (May 12, 2009). “Rare blue diamond sells for record $9.5 million”. Reuters. Retrieved May 13, 2009.
^ Pomfret J (December 1, 2009). “Vivid pink diamond sells for record $10.8 million”. Reuters.
^ Cowing MD (2014). “Objective ciamond clarity grading” (PDF). Journal of Gemmology. 34 (4): 316-332. doi:10.15506/JoG.2014.34.4.316. Archived (PDF) from the original on 2021-04-18. Retrieved 19 September 2021.
^ Wang W, Cai L (September 2019). “Inclusion extraction from diamond clarity images based on the analysis of diamond optical properties”. Optics Express. 27 (19): 27242-27255. Bibcode:2019OExpr..2727242W. doi:10.1364/OE.27.027242. PMID 31674589. S2CID 203141270.
^ “Fact Checking Diamond Fluorescence: 11 Myths Dispelled”. GIA 4Cs. 2018-03-27. Retrieved 2022-06-06.
^ Wei L, Kuo PK, Thomas RL, Anthony TR, Banholzer WF (June 1993). “Thermal conductivity of isotopically modified single crystal diamond”. Physical Review Letters. 70 (24): 3764-3767. Bibcode:1993PhRvL..70.3764W. doi:10.1103/PhysRevLett.70.3764. PMID 10053956.
^ a b c Erlich EI, Hausel WD (2002). Diamond deposits: origin, exploration, and history of discovery. Littleton, CO: Society for Mining, Metallurgy, and Exploration. ISBN 978-0-87335-213-0.
^ a b c d e f g h i j k l m n o p q r Shirey SB, Shigley JE (December 1, 2013). “Recent Advances in Understanding the Geology of Diamonds”. Gems & Gemology. 49 (4): 188-222. doi:10.5741/GEMS.49.4.188.
^ Carlson RW (2005). The Mantle and Core. Elsevier. p. 248. ISBN 978-0-08-044848-0.
^ Deutsch A, Masaitis VL, Langenhorst F, Grieve RA (2000). “Popigai, Siberia-well preserved giant impact structure, national treasury, and world’s geological heritage”. Episodes. 23 (1): 3-12. doi:10.18814/epiiugs/2000/v23i1/002.
^ King H (2012). “How do diamonds form? They don’t form from coal!”. Geology and Earth Science News and Information. geology.com. Archived from the original on October 30, 2013. Retrieved June 29, 2012.
^ Pak-Harvey A (October 31, 2013). “10 common scientific misconceptions”. The Christian Science Monitor. Retrieved August 30, 2017.
^ Pohl WL (2011). Economic Geology: Principles and Practice. John Wiley & Sons. ISBN 978-1-4443-9486-3.
^ Allaby M (2013). “mobile belt”. A dictionary of geology and earth sciences (4th ed.). Oxford: Oxford University Press. ISBN 978-0-19-174433-4.
^ Kjarsgaard BA (2007). “Kimberlite pipe models: significance for exploration” (PDF). In Milkereit B (ed.). Proceedings of Exploration 07: Fifth Decennial International Conference on Mineral Exploration. Decennial Mineral Exploration Conferences, 2007. pp. 667-677. Archived (PDF) from the original on 2012-12-24. Retrieved March 1, 2018.
^ a b Deep Carbon Observatory (2019). Deep Carbon Observatory: A Decade of Discovery. Washington, DC. doi:10.17863/CAM.44064. Archived from the original on 17 December 2019. Retrieved 13 December 2019.
^ Cartier K (April 2, 2018). “Diamond Impurities Reveal Water Deep Within the Mantle”. Eos. 99. doi:10.1029/2018EO095949.
^ Perkins S (March 8, 2018). “Pockets of water may lie deep below Earth’s surface”. Science.
^ Lee CA, Jiang H, Dasgupta R, Torres M (2019). “A Framework for Understanding Whole-Earth Carbon Cycling”. In Orcutt BN, Daniel I, Dasgupta R (eds.). Deep carbon: past to present. Cambridge University Press. pp. 313-357. doi:10.1017/9781108677950.011. ISBN 978-1-108-67795-0. S2CID 210787128.
^ Wei-Haas M (2019-10-10). “Bizarre ‘nesting doll’ diamond found inside another diamond”. National Geographic. Retrieved 2021-11-27.
^ Fowler C (2021-11-26). “Rare ‘double diamond’ discovery comes as race to restart mothballed Ellendale mine heats up”. Australian Broadcasting Corporation. Retrieved 2021-11-27.
^ Tielens AG (July 12, 2013). “The molecular universe”. Reviews of Modern Physics. 85 (3): 1021-1081. Bibcode:2013RvMP…85.1021T. doi:10.1103/RevModPhys.85.1021.
^ Kerr RA (October 1999). “Neptune may crush methane into diamonds”. Science. 286 (5437): 25. doi:10.1126/science.286.5437.25a. PMID 10532884. S2CID 42814647.
^ Scandolo S, Jeanloz R (November-December 2003). “The Centers of Planets: In laboratories and computers, shocked and squeezed matter turns metallic, coughs up diamonds and reveals Earth’s white-hot center”. American Scientist. 91 (6): 516-525. Bibcode:2003AmSci..91..516S. doi:10.1511/2003.38.905. JSTOR 27858301. S2CID 120975663.
^ Kaplan S (August 25, 2017). “It rains solid diamonds on Uranus and Neptune”. The Washington Post. Retrieved October 16, 2017.
^ Max Planck Institute for Radio Astronomy (August 25, 2011). “A planet made of diamond”. Astronomy magazine. Retrieved September 25, 2017.
^ Heaney PJ, de Vicenzi EP (2005). “Strange Diamonds: the Mysterious Origins of Carbonado and Framesite”. Elements. 1 (2): 85-89. doi:10.2113/gselements.1.2.85.
^ Shumilova T, Tkachev S, Isaenko S, Shevchuk S, Rappenglück M, Kazakov V (April 2016). “A “diamond-like star” in the lab. World Bank Publications. pp. 297-299. ISBN 978-0-8213-6835-0.
^ “Bourse listing”. World Federation of Diamond Bourses. PMID 16432191.
^ “Diamond oceans possible on Uranus, Neptune”. Discovery News. Archived from the original on 2012-03-11.
^ “Diamond: Molten under pressure”. Nature Physics. 6 (1): 9-10. Bibcode:2010NatPh…6….9S. doi:10.1038/nphys1491.
^ Rajendran V (2004). Materials science. IOS Press. 9-30. ISBN 978-1-61499-220-2.
^ a b Rock PA (1983). Chemical Thermodynamics. pp. 223, 230-249.
^ “The strength of diamond”. Applied Physics Letters. 87 (14): 141902. Bibcode:2005ApPhL..87n1902E.1063/1.2061853. 103 (5): 1204-1208. Bibcode:2006PNAS..103.1204C.1073/pnas.0510489103. 117 (40): 24634-24639. Bibcode:2020PNAS..11724634S.1073/pnas.2013565117. Vol. 28. pp. 46-47. ISBN 978-0-8247-0987-7.
^ Gems: Their sources, descriptions and identification (5th ed.). Springer. p. 102.
^ Handbook of ceramic grinding and polishing. ^ Bauer M (2012). Precious Stones. CRC Press. pp. 984-992. ISBN 978-0-8247-9994-6.
^ “Gem Cutting”. Popular Mechanics. 74 (5): 760-764. 1940. ISSN 0032-4558.
^ Rapaport M. “Keep the Diamond Dream Alive”. Bibcode:2006ApJ…653L.153G. doi:10.1086/510451. PMID 24347828.
^ “Diamonds from Outer Space: Geologists Discover Origin of Earth’s Mysterious Black Diamonds”. January 8, 2007.
^ “Diamonds Are Indestructible, Right?”. Dominion Jewelers. 2015-12-16. Retrieved 2020-10-31.
^ M. Seal, “The abrasion of diamond”, Proceedings of the Royal Society A 248:1254 (25 November 1958) doi:10.1098/rspa.1958.0250
^ Weiler HD (2021-04-13) [1954], The wear and care of records and styli, retrieved 2022-01-01 – via Shure
^ Properties, Growth and Applications of Diamond. ^ “High spatial resolution photoluminescence and Raman spectroscopic measurements of a natural polycrystalline diamond, carbonado”. Diamond and Related Materials.

^ Smithson T (1797) [December 15, 1797]. “On the nature of the diamond”. Philosophical Transactions of the Royal Society of London: Giving Some Account of the Present Undertakings, Studies, and Labours of the Ingenious, in Many Considerable Parts of the World. Springer. ISBN 978-3-540-66582-3.

Further reading

Epstein EJ (February 1982).”. The Atlantic Monthly. Archived from the original on 15 March 2006. Retrieved 2 January 2023.
Tyson P (November 2000). “Diamonds in the Sky”. The Diamond Deception. Nova. PBS. Retrieved 2 January 2023.

External links

ISBN 978-1-4179-7715-4.
Koizumi S, Nebel CE, Nesladek M (2008). Physics and Applications of CVD Diamond. Mining Journal Press.
Davies G (1994). Properties and growth of diamond. INSPEC. ISBN 978-0-85296-875-8.
O’Donoghue M (2006). Gems. ISBN 978-3-9800434-6-5.
Radovic RL, Walker RM, Thrower PA (1965). Chemistry and physics of carbon: a series of advances. Antwerp: Rubin & Son. Elsevier. ISBN 978-1-48329124-6.
Field JE (1979). The Properties of Diamond. Elsevier. ISBN 978-0-7506-5856-0.
O’Donoghue M, Joyner L (2003). Identification of gemstones. London: Academic Press. ISBN 978-0-12-255350-9.
Field JE (1992). The Properties of Natural and Synthetic Diamond. London: Academic Press. ISBN 978-0-12-255352-3.
Hershey W (1940). The Book of Diamonds. ISBN 978-0-8247-0987-7.
Tolkowsky M (1919). Diamond Design: A Study of the Reflection and Refraction of Light in a Diamond. New York: Marcel Dekker. Great Britain: Butterworth-Heinemann. ISBN 978-0-7506-5512-5.
Feldman A, Robins LH (1991). Applications of Diamond Films and Related Materials. Kluwer Academic Publishers. ISBN 978-0-7923-9524-9.
Pagel-Theisen V (2001). Diamond Grading ABC: the Manual. Brunswick House Press. ISBN 978-0-9728223-2-9.
Zaitsev AM (2001). Optical Properties of Diamond: A Data Handbook. Hearthside Press New York. Spon.
Wise RW (2016). Secrets of the Gem Trade: The Connoisseur’s Guide to Precious Gemstones (Second ed.). London: E. & F.N. Wiley VCH. ISBN 978-3-527-40801-6.
Pan LS, Kani DR (1995). Diamond: Electronic Properties and Applications. 87: 123-127. doi:10.1098/rstl.1797.0005. S2CID 186213726. Retrieved 2022-07-01.

General and cited references

Even-Zohar C (2007). From Mine to Mistress: Corporate Strategies and Government Policies in the International Diamond Industry (2nd ed.).